Interceptor
Smart Biomatic Grease Interceptor System
(Environment, Social & Govern (ESG). Net Zero Decarbonization)
FROSCO Biomatic Grease Interceptor is specially designed to intercept both the FOG (fat, grease, and oil) and the starch residue and solid waste. The Sediment trap compartment will filter and trap solid waste food and allow greasy water to continue to enter into the grease interceptor compartment.
A complete system of FROSCO Automatic Biomatic Grease Interceptor comprises :
- Frosco Biomatic Grease Interceptor.
- Frosco FV-5000 Automatic Dosing Unit.
- Froscozyme Biomatic Liquid Enzyme.
No fat, No oil, No grease, Low suspended solid, Sludge waste and bod level in waste water effluent.
Able to comply to the public (STP) Sewage Treatment Plant Fog and Bod intake parameter requirement.
(Subjected to be strictly following manufacturer all technical advise included regularly S&M,
correct model, size selection and method of installation)
Please contact us via Whatsapp tel: 019-3851168 or Tel: 603-6185 9262 for further information
Oil (Engine) Interceptor
(Environment, Social & Govern (ESG). Net Zero Decarbonization)
FROSCO Oil Interceptor works on the principle that oils are lighter than water and thus gravity causes the oil to rise and the water to fall. It is designed to separate oils and other light density volatile liquids which are discharged into the drainage system.
In commercial establishments, the spillages of oil or diesel could occur such as garages, transport workshops, diesel refueling and storage areas, and where vehicles or plants are washed down or steam cleaned.
Please contact us via Whatsapp tel: 019-3851168 or 03 – Tel: 603-6185 9262. For further information
Storm Water Interceptor System
Model
FSC 835 XL/R
Size
A=(1500mmØ) B=(300mm) C=(2300mm) D=(300mm) E=(300mm) F=(2000mm)
Flowrate
350GPM
Pipe Ø
150mmØ - 200mmØ
Approx Weight Full
3500 KG (TANK COME WITH WATER ONLY)
Material
STAINLESS STEEL PREFABRICATED TANK
Note: Varies size available subject to the flowrate and site condition for pipe positioning
Please contact us via Whatsapp tel: 019-3851168 or 03 – Tel: 603-6185 9262. For further information
Chemical Holding, Dilution and Neutralisation Tank System
Dilution Recovery Trap is fabricated in stainless steel materials to give it high chemicals and heat resistance properties. It is ideal for under bench installations serving one multiple sink
Neutralizing Tank Suitable for centralized installation for neutralizing and dilution of laboratory acids and chemicals. It is fabricated in stainless steel materials offering high chemical and impact resistant. The cover is a screw-down stainless steel plate. Periodic maintenance is recommended and the neutralizing agent topped up if necessary.
Please contact us via Whatsapp tel: 019-3851168 or 03 – Tel: 603-6185 9262. For further information
